STI-1.6-220VR |
| Back to Machine Range |
| VR Press page |
| See also STI-1.0-110VR (110ton) |
| See also STI-1.6-160VR (160ton) |
Machine Summary |
Compact design with low operating height (41.5”) and strip feeding height (81”) eliminating need for steps or platforms. High injection pressure (201Mpa) and large heating platen (25.59” x 25.59”). Linear-scale measurement of clamp, ejector, injector and nozzle enabling highly accurate settings and control. Dual level safety system, diagnostics and maintenance-friendly design. |
| Request More Info / Quotation |
Standard Attachments |
| 10inch color graphic terminal |
| Heater breakage detector |
| Electrical circuit for vacuum option |
| Molding conditions memory – up to 80 |
| Sequential injector, clamp, screw, ejector |
| Photoelectric safety curtain |
| Synchronized dual start buttons |
| "One-touch" mold attachment (Upper) |
| Heat regulator |
| Safety sensors and alarms |
Optional Attachments |
| Cold runner system |
| Vacuum pump |
| Hopper feeder |
| Mold heater |
| Mold temperature memory |
| "One-touch" mold attachment (lower) |
| Ejector pins |
| Core slide |
| Production monitoring system |
Machine Specifications |
||
| Clamping Force: | 242 US Ton | 220 Metric Ton |
| Daylight: | 27.56in | 700mm |
| Clamp Stroke: | 19.68in | 500mm |
| Heating Platen: | W25.59in D25.59in | W650mm D650mm |
| Platen Heaters: | Upper: 6 x 1.2kW | |
| Lower: 6 x 1.2kW | ||
| Ejector Force: | 5.51 US Ton | 5 Metric Ton |
| Injection Volume: | 61/97.6/122in3 | 1000/1600/2000cm3 |
| Injection Pressure: | 29,152Psi | 201Mpa |
| Flow Volume: | 21.13gal/min | 80L/min |
| Operating Height | 41.54in | 1055mm |
| Screw Height | 80.91in |
2055mm |
| Machine Dimensions | W57in x D121 x H175 | W1440mm D3065 H4431 |