VERTICAL INJECTION MOLDING MACHINES
Clamp Pressures:      25ton/40ton/63ton/75ton/100ton/110ton/150ton/160ton/200ton/220ton/300ton/400ton/450ton/600ton/800ton/1200ton/1500ton/2500ton
Injection Volumes:   100cc/160cc/400cc/630cc/1000cc/1600cc/2000cc/3000cc/4000cc/6400cc/8000cc/9000cc/2500cc

Machine Examples:

STI-0.4-40VA3

Picture
Main Specifications:
Clamp Pressure:      40ton
Injection Vol.:            400cc
Injection Pressure:   157Mpa
Platen Size:               350mm x 350mm
See Standard Features
See Machine Options

STI-1.0-110VR

Picture
Main Specifications:
Clamp Pressure:      110ton
Injection Vol.:            1000cc
Injection Pressure:   198Mpa
Platen Size:               500mm x 500mm
See Standard Features
See Machine Options 

STI-1.6-160VR

Picture
Main Specifications:
Clamp Pressure:       160ton
Injection Vol.:            1600cc
Injection Pressure:   201Mpa
Platen Size:               600mm x 600mm
See Standard Features
See Machine Options

STI-2.0-220VR

Picture
Main Specifications:
Clamp Pressure:       220ton
Injection Vol.:            2000cc
Injection Pressure:   201Mpa
Platen Size:               650mm x 650mm
See Standard Features
See Machine Options

STI-4.0-400VS

Picture
Main Specifications:
Clamp Pressure:       400ton
Injection Vol.:            4000cc
Injection Pressure:   148Mpa
Platen Size:               630mm x 830mm
See Standard Features
See Machine Options

STI-4.0-450VS

Picture
Main Specifications:
Clamp Pressure:       450ton
Injection Vol.:            4000cc
Injection Pressure:   148Mpa
Platen Size:               800mm x 1000mm
See Standard Features
See Machine Options

Standard Features

10" Graphic Touch Screen
PLC Control (AB/Omron/Mitsubishi)
Molding Recipe Storage
Linear Transducers
Sequential Control of all Movements
Dual Level Safety Circuit
Light Curtains
Dual Start Buttons
Nozzle Lift
Steel Safety Doors
Alarm Displays & Diagnostics
Platen Heaters
Platen Heater Breakage Detection
PID Closed Loop Temp. Control
Temperature Regulators
Electrical Circuit for Vacuum Pump
"Slot In" Quick Mold Attachment
Rubber Strip Breakage

Machine Options

Platen Slide
Core Slide
Lower Ejectors (Internal / External)
Upper Ejectors
Closed Loop Injection
Mold Heater Control
Multiple Platen Heat Zones
Vacuum Pump
Cold Runner Temperature Regulator
Rubber Strip Active Feed System
Hooper Cooling
Mold Temperature Recorder
Mold Release Auto Spray
Rear Loading Rollers